Yes, you read that right. The side panels for VMK25 and VMK25.2 headphones can be printed yourself, completely free of charge. If you own a 3D printer or know someone who does, this is for you.
We provide a ready-made 3D model that you can download as a ZIP package and print. The end result can be understated or completely over the top, depending on your taste.
Download and files
Download the file: https://www.valco.support/downloads/vmk25_sidepanels.zip
The ZIP contains 3D models of the VMK25 side panels in two versions:
- With Valco logo
- Without logo (a clean base for remixes and your own designs)
The models fit both VMK25 and VMK25.2 headphones. The files are intended for personal use and your own customization.
Magnets
For this, you need 5.5 x 1.5 mm neodymium magnets. If 1.5 mm height is hard to find, 2 mm will also work. Magnets are available in packs of ten from craft stores, hardware stores, and online for a few euros.
A smaller diameter also works, but then the magnets need to be glued into the recesses so they stay in place. 5.5 mm magnets fit by pressing them in.
Check the polarity before installation, otherwise the cover will not close no matter how much force you use. And that would be stupid.
Finishing
Panels straight from the printer are slightly rough. Sandpaper, paint, fabric, leather, or any other coating will completely change the final result. That is the whole idea.
If something goes wrong
If your printer produces a plastic pancake or the panel does not fit, no worries. We also sell ready-made VMK25 Skins for €29.90: https://valco.fi/products/vmk-skin
This is Valco’s official encouragement for headphones that look like you: make them yourself and tell anyone who asks, "I made them myself. Because I can." 😎
Important! If and when you make some really awesome covers, please show them to us.
